Results 1 to 7 of 7

Thread: Need to fix and seal a plastic bong...

  1. #1
    clevemire's Avatar
    clevemire is offline Registered+
    Join Date
    Jul-05-2004
    Posts
    1,380

    Question Need to fix and seal a plastic bong...

    I apologize in advance, because this question has probably been asked and answered before, but I'm on very limited time right now.

    A big piece of the tube on a plastic bong I have has been broken off. Luckily, it's off the top of the tube, so it's not necesarilly irreparable. If I use a good sealant, I know it will easily be fixed.
    My question is, what kind of sealant would be good to attach and seal the broken piece? I was thinking hot glue, because I have plenty of it, and I've used it to make and seal homemade bongs before.

    Any advice is greatly appreciated. Thanks!!

  2. #2
    Join Date
    Jul-14-2004
    Posts
    1,060
    hot glue should work fine , so i would try that first , just make sure not to get n e of the glue by , near , or touching the pipe part u smoke out of , cause it will melt , and u will proably suck fumes in ur lungs too when u hit it

    hope that helped sum

    also , try taping it with electrical tape to stableize it , then use the glue gun
    " Heh - Heh , you Ladies Every Been Penetrated ? Giggity , Giggity , Giggity , Goo ..... Heh - Heh , Alllllllll Riiiiiiiight "

    - Glen Quagmire -

  3. #3
    Kronik Bagz's Avatar
    Kronik Bagz is offline Registered+
    Join Date
    Mar-14-2004
    Posts
    773
    do u mean "plastic" as in plastic or acrylic. if its jus ordinary plastic throw it out. but if u got an acrylic bong it can be easily repaired. if u dont really care how it looks jus so u got something to smoke from jus duct tape it as long as its not close to the bowl or anywhere it can heat up. if ur like me an u like ur smoking "utencils" to look halfway decent try the hot glue. it does work but it will melt if heated. also im not to sure on this one but rubber cement meight work, but before u use it squirt some on a piece of paper to dry. it has strong fumes so u wanna make sure they arent there anymore when it dries. also u should try elmers wood glue, if that shit can hold 4 pieces of wood together while i beat the hell out of it wit a lathe(or however u spell it) it should work pretty good wit some plastic bong that doesnt get too much pressure where u glue it.


    i thing that hot glue would be ur best bet an if it keeps breaking, duct tape it, as long as it smokes fine theres no problem.


    peace n bagz
    kronik

    electroshock, brainwave, hair rize,
    look in this killers eyes,
    static with me you only fantisize,
    rub the wrong way, quick reflex,
    eager to jump at fuckin anyone an put em in check,
    i let things get to me now im tha one startin tha static,
    easy come easy go problem solved wit automatics,
    deep breaths takin,
    no need not necisary cause tha static bein started,
    does it scare me?, not at all

  4. #4
    smokey's Avatar
    smokey is offline Registered+
    Join Date
    Jan-28-2004
    Posts
    551
    u could try silicone sealant they use it to seal the glass on fish tanks n shit like tht can get it at any hardware store. happy fixing
    "Remember it, write it down, take a picture..........i dont give a f**k !!! "

  5. #5
    Uchiha Smoker's Avatar
    Uchiha Smoker is offline Registered
    Join Date
    Feb-25-2004
    Posts
    27
    Just use some Big League Chew

  6. #6
    NowhereMan is offline Registered+
    Join Date
    Jan-18-2004
    Posts
    2,262
    Quote Originally Posted by clevemire
    I apologize in advance, because this question has probably been asked and answered before, but I'm on very limited time right now.

    A big piece of the tube on a plastic bong I have has been broken off. Luckily, it's off the top of the tube, so it's not necesarilly irreparable. If I use a good sealant, I know it will easily be fixed.
    My question is, what kind of sealant would be good to attach and seal the broken piece? I was thinking hot glue, because I have plenty of it, and I've used it to make and seal homemade bongs before.

    Any advice is greatly appreciated. Thanks!!
    to be un-noticed,,,,superglue carefully,,,

  7. #7
    clevemire's Avatar
    clevemire is offline Registered+
    Join Date
    Jul-05-2004
    Posts
    1,380
    Quote Originally Posted by NowhereMan
    to be un-noticed,,,,superglue carefully,,,
    That I did. I laid down a thin strip of glue on the actual bong (not the broken piece), and attached the piece to the tube, and then laid another small band of glue on the outside of the crack. It looks decent, and I'll test it out in a little while. Thanks for the tips, fellas!

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •