|
|
|
|||||||
| Grow FAQs Growing FAQs - the place to start your knowledge search |
|
|
|
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
Nov-08-2006, 13:03
|
||||
|
||||
|
DIY- How To - Carbon Filter
Pic 1- Here are all the supplies you need for this 4" carbon scrubber.
__________________
First Grow  Second Grow How to make a rubbermaid grow box How to make a Carbon air filter Sinsemilla 
|
| Cannabis Links |
|
Legal Bud | Rolling Papers | Herbal Smoke | Herbal Vaporizer Scales & Accessories | Cheap Vaporizers | Seeds Cannabis
|
|
Nov-08-2006, 13:17
|
||||
|
||||
|
First thing to build is the inner chamber.
pic1 - supplies: 6"-4" reducer 4" cap 2 - 4.5" screw fasteners 10" length of Heavy duty chicken wire 2 - pannyhose legs pic2 - Wrap the 10" length of chicken wire around the 4" end cap to form a cylinder. I used a bunch of zip ties to secure the cylinder's shape. Pic3 - Slide the pannyhose legs over the cylinder to act as a screen for the carbon. Pic4 - Secure the end cap on one end of the cylinder with one of the 4.5" screw fasteners. Pic5 - Secure the 6"-4" reducer to the open end of the cylinder with the other 4.5" screw fastener. That's it. The inner chamber is done. Set aside we'll need it in a bit.
__________________
First Grow Second Grow How to make a rubbermaid grow box How to make a Carbon air filter Sinsemilla
|
|
Nov-08-2006, 13:30
|
||||
|
||||
|
Next to build is the Outer Chamber.
Pic1-Supplies 6" cap 2 - 6.5" screw clamps/fasteners 12" length of Heavy duty chicken wire 3 - pannyhose legs pic2 - Wrap the 12" length of chicken wire around the 6" end cap to form a cylinder. I used a bunch of zip ties to secure the cylinder's shape. Pic3 - Slide the pannyhose legs over the cylinder to act as a screen for the carbon. Pic4 - Now you should have all of these parts....almost done  Pic5- Now slide the 6" cylinder over the 6" section of the 6"-4" reducer (and the inner chamber) and secure with a 6.5" screw fastener
__________________
First Grow Second Grow How to make a rubbermaid grow box How to make a Carbon air filter Sinsemilla
|
|
Nov-08-2006, 13:38
|
||||
|
||||
Filling with Activated carbon and finishing it.
pic1 - Without the 6" end cap on the bottom, the filter should look like this....notice this space in between the chambers....this is where the activated carbon goes. pic2 - I used an oil spout with the end cut off to more easily disperse the carbon into the filter. pic3 - Here is the filter filled with carbon. pic4 - Finally put the 6" end cap on the bottom and we're good to go. Pic5 - Here is the finally product. Have fun kiddies...post if you have a question 
__________________
First Grow Second Grow How to make a rubbermaid grow box How to make a Carbon air filter Sinsemilla
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
|
|
|
Linear Mode
