Hey guys Im on my way to home hardware today and Im going to be purchasing the correct PVC pipes to make the honey oil.

Im thinking a foot 1/2 long tube, with 2 end caps.

Im going to drill 7/14th inch drill bit into the top cap to insert the butaine, and Im going to dril 5-6 holes on the bottom cap for the escape.

http://www.a1b2c3.com/drugs/hash005.htm

Think this is a proper procedure? It says 100grams of leaves will yield 1g of honey oil .... Im using a quarter pound of shake and hope to get roughly 16 viles.

Have you tried looking up the Honey bee extractor

also there is a thing about it on erowid.com you have to watch though with the plastic, i have heard that pvc might release chems into the oil

i never usualy get much but im workin on it........let us know your results?

PVC is a known carcinogen...

Not exactly. PVC is fine until you start running questionable materials through it. They leech off bad stuff in the plastic. I was reading about PVC Butane tubes a couple weeks ago and this particular article said that there were no known interactions between PVC and butane though.

__________________
"And though we'd eliminated the threat of the enemy flying planes into buildings, no-one was prepared for terrorists flying two buildings into the sides of planes. No-one was killed but a lot of people were surprised." -Time Trumpet, Episode 3

Could you post the article is if you can cos if its true im gonna build a huge one for like 10 ounce of shake/ shade leaves

butane is corrosive, and pvc when decomposing releases hydrogen chloride. it may be perfectly safe, i don't know, but i would try a material a little less toxic than pvc has been proven to be

PVC is a bad idea if you are running any sort of gas through it. Hydrogen chloride gas is near any heat source could entice it to be hydrochloric acid. Go with something like surgicial steel if you can get your hands on it.

Uhh so insanity.

I went out to home hardware today and bought a 2ft long PVC pipe and 2 end caps. I drilled a bit hole to fit the tip of the butain and 3-4 exit holes.

Infact I just finished shooting a quarter pound of shake in it and it worked fine.

seeing how pvc is derived from petrochemicals, it seems likely that this is the case.

__________________
On the waydown they saw a lot they don't remember
and if you asked them how, they couldn't say how they got there
and if you want them now you could just pull on the lever
and say, "I'm hung up on gravity."
you move your mouth and you start to talk
you close your eyes and then lose the thought
what's mine is mine and what's yours you probably got
and we all fall.

That's from the very end of this article at Erowid.

__________________
"And though we'd eliminated the threat of the enemy flying planes into buildings, no-one was prepared for terrorists flying two buildings into the sides of planes. No-one was killed but a lot of people were surprised." -Time Trumpet, Episode 3

Dont use a PVC pipe that is totally the wrong kind. omfg . . . don't do it. . .

__________________
4/20 Grow. . .4/20/2007 Here I Come. . .

Round 2. . .Second Round. . .

Why is Herb Illegal?

A killer, you keep workin, and working, and working and they keep
taking, and taking, and taking. They'll throw you a few little crumbs
they'll give you a home, a car, a television, a vacation. Someday you
may even have a bank account that you're scared to lose.

-Corperate Avenger

use copper or steel dude PVC is bad for joo